Grinding Mill Grinding Roller Feed Control Structure

Grinding Mill Grinding Roller Feed Control Structure

Summary of contents: In the traditional mill structure, it is usually controlled by the size of the feed port to control the amount of feed. The speed of feeding depends entirely on the experience of the operator. If the feed is too fast, it will affect the quality of the product, resulting in There are too many particles in the product. If the feed is too small, the working efficiency of the mill will be reduced, and even the grinding roller of the mill will be damaged.

Advantages of grinding mill grinding roller feed control structure

In the traditional mill structure, the size of the feed is usually controlled by manually controlling the size of the feed. The speed of the feed depends entirely on the experience of the operator. If the feed is too fast, the quality of the product will be affected, resulting in particles in the product. Too much, if the feed is too small, it will reduce the working efficiency of the mill and even damage the grinding roller of the mill.

Grinding mill

Compared to conventional pure mechanical mills, our grinding mills control the feed rate of the rolls by means of feed rolls or feed control gates. The feeding roller is the main structure for feeding the grinding roller. During the working process of the milling machine, if the feeding amount is too large, the speed of the feeding roller will increase accordingly. If the feeding amount is reduced, the feeding roller will decrease. Speed, until the speed is reduced to a special hour, the feed roller stops, the two grinding rollers are detached, and the grinding roller is prevented from being damaged. The electronic sensor can be set above the feeding position, and the speed of the feeding roller and the opening and closing of the feeding door can be controlled by the input signal. The speed of the feeding roller is stepless speed regulation, and the speed can be adjusted according to the size of the material flow. There is an electronic sensing system in each material channel, and the product flow and speed can be automatically controlled. The feed structure of the grinding mill can also be changed according to different grain changes. When the low-protein soft wheat is replaced with high-protein hard wheat or spring wheat, the feed structure adjusts the speed of the feed roller to ensure the product. The quality can also avoid excessive feeding of the equipment and damage to the equipment.

Designing and setting up the control system to effectively adjust the speed of the feed roller is the key to our optimized design of the grinding mill. The optimized design of the mill feed structure can effectively improve the efficiency of the mill and improve the mill. The effect of running.

Related Articles

  1. Graphite Ultrafine Mill Price
  2. Silicon Carbide Ultrafine Mill
  3. Ball Grinding Machine Installation Maintenance

Related Machine